Gigabyte GA-870A-USB3 Скачать руководство пользователя

Страница: 37 / 96

- 37 -

BIOS Setup

RAS to CAS R/W Delay

Options are: Auto (default), 5T~12T.

Row Precharge Time

Options are: Auto (default), 5T~12T.

Minimum RAS Active Time

Options are: Auto (default), 15T~30T.

1T/2T Command Timing

Options are: Auto (default), 1T, 2T.

TwTr Command Delay

Options are: Auto (default), 4T~7T.

Trfc0 for DIMM1

Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.

Trfc2 for DIMM2

Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.

Trfc1 for DIMM3

Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.

Trfc3 for DIMM4

Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.

Write Recovery Time

Options are: Auto (default), 5T~8T, 10T, 12T.

Precharge Time

Options are: Auto (default), 4T~7T.

Row Cycle Time

Options are: Auto (default), 11T~42T.

RAS to RAS Delay

Options are: Auto (default), 4T~7T.

Bank Interleaving

Enables or disables memory bank interleaving.

Enabled

allows the system to simultaneously access dif-

ferent banks of the memory to increase memory performance and stability. (Default: Enabled)

Channel interleave

Enables or disables memory channel interleaving.

Enabled

allows the system to simultaneously access

different channels of the memory to increase memory performance and stability. (Default: Enabled)

Содержание GA-870A-USB3

































































































Результаты поиска

Содержание GA-870A-USB3

Отзывы:

Похожие инструкции для GA-870A-USB3

Бренды по названию

Популярные бренды

Gigabyte GA-870A-USB3, Руководство пользователя

Результаты поиска

Содержание GA-870A-USB3

Отзывы:

Похожие инструкции для GA-870A-USB3

Бренды по названию

Популярные бренды