Gigabyte G292-2G0 Скачать руководство пользователя страница 86

Страница: 86 / 113

- 86 -

BIOS Setup

5-3-5

IIO Configuration

Parameter

Description

IIO Configuration

Intel

VT for Directed I/O (VT-d)

Press [Enter] to configure advanced items.

Intel

VT for Directed I/O

– Enable/Disable the Intel VT for Directed I/O (VT-d) support

function by reporting the I/O device assignment to VMM through
DMAR ACPI Tables.

– Options available: Enable, Disable. Default setting is

Enable

ACS Control

– Enable: Programs ACS only to Chipset PCIe Root Ports Bridges.

– Disable: Programs ACS to all PCIe bridges.

– Default setting is

Enable

DMA Control Opt-In Flag

– Enable/Disable DMA_CTRL_PLATFORM_OPT_IN_FLAG

in DMAR table in ACPI. Not compatible with Direct Device
Assignment (DDA).

– Options available: Enable, Disable. Default setting is

Disable

Interrupt Remapping

– Enable/Disable the interrupt remapping support function.

– Options available: Auto, Enable, Disable. Default setting is

Auto

x2APIC Opt Out

– Options available: Enable, Disable. Default setting is

Disable

Pre-boot DMA Protection

– Options available: Enable, Disable. Default setting is

Disable

Содержание G292-2G0


















































































































Результаты поиска

Содержание G292-2G0

Отзывы:

Gigabyte G292-2G0, Руководство пользователя, Страница: 86 / 113

Результаты поиска

Содержание G292-2G0

Отзывы: