Gigabyte G292-2G0 Скачать руководство пользователя страница 85

Страница: 85 / 113

- 85 -

BIOS Setup

Parameter

Description

Memory RAS Configuration

(continued)

Leaky bucket time window based interface

– Enable/Disable leaky bucket time window based interface.

– Options available: Disabled, Enabled. Default setting is

Disabled

Leaky bucket low bit

–

Configures leaky bucket low bit (1-63).

– Press the <+> / <-> keys to increase or decrease the desired

values.

Leaky bucket high bit

–

Configures leaky bucket high bit (1-63).

– Press the <+> / <-> keys to increase or decrease the desired

values.

ADDDC Sparing

(Note)

– Enable/Disable ADDDC Sparing.

– Options available: Disabled, Enabled. Default setting is

Disabled

Enable ADDDC Error Injection

– Options available: Disabled, Enabled. Default setting is

Enabled

Column Correction Disable

– Options available: Disable, Enable. Default setting is

Disable

Set PMem Die Sparing

– Options available: Disabled, Enabled. Default setting is

Disabled

Patrol Scrub

– Options available: Disabled, Enabled, Enable at End of POST.

Default setting is

Disabled

(Note) Advanced items prompt when this item is defined.

Содержание G292-2G0


















































































































Результаты поиска

Содержание G292-2G0

Отзывы:

Gigabyte G292-2G0, Руководство пользователя, Страница: 85 / 113

Результаты поиска

Содержание G292-2G0

Отзывы: