Gigabyte G292-2G0 Скачать руководство пользователя страница 83

Страница: 83 / 113

- 83 -

BIOS Setup

5-3-4

Memory Configuration

Parameter

Description

Integrated Memory Controller (iMC)

Enforce POR

When set to Enable, the system enforces Plan Of Record restrictions
for DDR4 frequency and voltage programming.
Options available: POR, Disable. Default setting is

Disable

Memory Frequency

Configures the maximum memory frequency. If Enforce POR is

disabled, user will be able to run at higher frequencies than the
memory support (limited by processor support).
Default setting is

Auto

Enable ADR

Enables the detecting and enabling of ADR (Asynchronous DRAM
Refresh) function.
Options available: Enable, Disable. Default setting is

Enable

Legacy ADR Mode

Enable/Disable the Legacy ADR Mode.
Options available: Enable, Disable. Default setting is

Disable

Minimum System Memory Size

Configures the minimum memory size.

Options available: 2GB, 4GB, 6GB, 8GB. Default setting is

2GB

ADR Data Save Mode

Specifies the Data Save Mode for ADR. Batterybacked or Type 01

NVDIMM.

Options available: Disable, Batterybacked DIMMs, NVDIMMs.
Default setting is

NVDIMMs

Erase-Arm NVDIMMs

Enable/Disable Erasing and Arming NVDIMMs.
Options available: Enable, Disable. Default setting is

Enable

Содержание G292-2G0


















































































































Результаты поиска

Содержание G292-2G0

Отзывы:

Gigabyte G292-2G0, Руководство пользователя, Страница: 83 / 113

Результаты поиска

Содержание G292-2G0

Отзывы: