manualshive.com logo in svg

Gigabyte G152-Z12, Руководство пользователя, Страница: 83 / 140

Поделиться
Скачать
Gigabyte G152-Z12 Скачать руководство пользователя страница 83

BIOS Setup

- 83 -

Parameter

Description

PPIN Opt-in

Enable/Disable the PPIN feature.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

SNP Memory (RMP Table) 
Coverage

Enabled: Enter system memory is covered.
Options available: Auto, Enabled, Disabled, Custom. 
Default setting is 

Auto

.

SMEE

Control secure memory encryption enable.
Options available: Auto, Enabled, Disabled.
Default setting is 

Auto

.

Action on BIST Failure

Action to take when a CCD BIST failure is detected.
Options available: Auto, Do nothing, Down-CCD.
Default setting is 

Auto

.

Fast Short REP MOVSB

Default is 1, cab be set to zero for analysis purpose as long as OS supports 
it.
Options available: Enabled, Disabled.Default setting is 

Enabled

.

Enhanced REP MOVSB/
STOSB

Default is 1, cab be set to zero for analysis purpose as long as OS supports 
it.
Options available: Enabled, Disabled.
Default setting is 

Enabled

.

REP-MOV/STOS Steaming

Allows REP-MOV/STOS to use non-caching streaming stores for large 
sizes.
Options available: Enabled, Disabled.
Default setting is 

Enabled

.

IBS hardware work around

Set if using IBS execution sampling without software workaround for 
erratum 1,285. May impac performance..
Options available: Enabled, Auto.
Default setting is 

Enabled

.

Содержание G152-Z12













































































































































Отзывы:

Нет отзывов