Gigabyte G-MAX N411, Руководство пользователя

Страница: 51 / 110

3 Introduction to Function
39
Here how to use the TouchPad pointing device:
1. The rectangular surface acts like a miniature duplicate of
your display screen. To move the mouse cursor, place the
finger lightly on the sensor pad and move in the desired
direction. If you reach the end of the pad, lift your finger and
place it back down on the other side of the pad.
2. To select an item, click on the item by pressing the left
button control or by simply tapping on the surface once. A
light, quick tap always works best. To execute an item, click
the left button twice or do a quick double tap on the surface.
3. To simulate holding the mouse button down (dragging an
icon or selection), use the tap-and-drag gesture. This feels
much like a double-click, except that the finger remains on
the pad after the second tap: Tap, lift, tap, hold and move.
The simulated button remains held as long as the finger
remains on the pad.
4. To scroll up or down the screen, just slide up or down the
scroll button to move the screen up or down.
Avoid spilling any liquid on the TouchPad surface and
always keep the TouchPad surface and pointing finger dry
from sweat built-up. Also do not expose TouchPad d to any
magnetic source object.
3.4 Configuring Your Screen
Display
The VGA display function of your notebook computer G-MAX
N411 is based on a high performance AGP local bus controller
and is fully IBM VGA compatible. This controller offers a large set
of extended functions and higher resolutions especially useful
when you are connecting an external high-resolution and
high-frequency CRT or LCD.
Please refer to Section 5 "Installing Your Notebook Computer
G-MAX N411 Device Drivers" of Chapter 2 in this manual for the
procedures on how to install the VGA device driver under
Windows. After installing the VGA driver, you would then
configure the display resolution or screen size to match your LCD
display panel. Your notebook computer G-MAX N411 provides a
1280x768 WXGA panels. You would also probably want to set
the amount of color output to display sharper images and
photos.