Giga-tronics GT-1000B Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 26

Giga-tronics GT-1000B Скачать руководство пользователя страница 11

Giga-tronics GT-1000B Microwave Power Amplifier

Introduction

Operation Manual, Part Number 34672-001, Rev. A, May 2013

Page 5

2.3.1

GT-1000B Front Panel Description

Table 1 describes the parts and functions of items on the front panel. Refer to Figure 1 on the

previous page for the location of the items on the front Panel.

Table 1: GT-1000B Front Panel Indicators and Connections

GT-1000B Front Panel Indicators and Connections

Name

Function

Power On/Off button

Switches the AC power on and off.

RF Output

•

SMA (f) connector

•

Option 02: Type-N (f) connector

RF Input (Option 04 Only)

Indicators

FAN FAULT

1

Illuminated indicates the exhaust fan has stopped rotating.

The POWER ON LED remains illuminated, and the amplifier is

fully functional until a TEMPERATURE FAULT occurs.

TEMPERATURE FAULT

1

When illuminated, indicates the internal heat sink

temperature exceeds 75 °C.
All amplifier functions are disabled, the POWER ON indicator

extinguishes, and any other fault indicators are disabled. The

amplifier remains non-functional with the TEMPERATURE

FAULT indicator illuminated until the heat sink temperature

drops to less than 50 °C, at which point, the amplifier will

automatically restart.

MODULE FAULT

1

When illuminated, the MODULE FAULT LED indicates that

one or more amplification modules in the final stage of the

power amplifier are malfunctioning. The POWER ON indica-

tor remains illuminated, and the amplifier remains functional

at reduced capability and performance.

POWER ON

When illuminated, indicates AC power is applied and unit is

ready to function

1

If any fault occurs, switch off the instrument’s power at the front panel before investigating the cause

of the failure.

«
...
9
10
11
12
13
...
»

Содержание GT-1000B



























Отзывы:

Нет отзывов