GIGA-BYTE TECHNOLOGY Z590 AORUS ULTRA Скачать руководство пользователя страница 40

Страница: 40 / 60

SATA Mode Selection

Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers

to AHCI mode.

Intel RST Premium With Intel Optane System Acceleration

Enables RAID for the SATA controller.

AHCI

Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

Aggressive LPM Support

Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset

SATA controllers. (Default: Disabled)

Port 0/1/2/3/4/5

Enables or disables each SATA port. (Default: Enabled)

SATA Port 0/1/2/3/4/5 DevSlp

Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)

Hot plug

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

Configured as eSATA

Enables or disables support for external SATA devices.

Intel(R) Ethernet Controller

This sub-menu provides information on LAN configuration and related configuration options.

Miscellaneous

LEDs in System Power On State

Allows you to enable or disable motherboard LED lighting when the system is on.

Off

Disables the selected lighting mode when the system is on.

Enables the selected lighting mode when the system is on. (Default)

LEDs in Sleep, Hibernation, and Soft Off States

Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.

This item is configurable when

LEDs in System Power On State

is set to

Off

Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)

Enables the selected lighting mode when the system enters S3/S4/S5 state.

RST_SW (MULTIKEY) (Functionality of the RST_SW Button)

Set this button to HW Reset

Use the button to reset your system. (Default)

Set this button to Switch LED On/Off

Use the button to turn on/off the motherboard LEDs.

Set this button to Enter BIOS Setup

Use the button to enter the BIOS Setup.

Set this button to Boot on Safe Mode Use the button to boot the system in safe mode.

Onboard DB Port LED

Allows you to enable or disable the LED lighting of the motherboard debug LEDs when the system is on.

(Default: On)

Intel Platform Trust Technology (PTT)

Enables or disables Intel

PTT Technology. (Default: Disabled)

3DMark01 Enhancement

Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)

(Note) This item is present only when you install a CPU that supports this feature.

- 40 -

Содержание Z590 AORUS ULTRA





























































Результаты поиска

Содержание Z590 AORUS ULTRA

Отзывы:

Похожие инструкции для Z590 AORUS ULTRA

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY Z590 AORUS ULTRA, Руководство пользователя

Результаты поиска

Содержание Z590 AORUS ULTRA

Отзывы:

Похожие инструкции для Z590 AORUS ULTRA

Бренды по названию

Популярные бренды