GIGA-BYTE TECHNOLOGY Z590 AORUS ULTRA Скачать руководство пользователя страница 37

Страница: 37 / 60

2-6 Settings

Platform Power

Platform Power Management

Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)

PEG ASPM

Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is

configurable only when

Platform Power Management

is set to

Enabled

. (Default: Disabled)

PCH ASPM

Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus. This item

is configurable only when

Platform Power Management

is set to

Enabled

. (Default: Disabled)

DMI ASPM

Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. This item is

configurable only when

Platform Power Management

is set to

Enabled

. (Default: Disabled)

ErP

Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)

Note: When this item is set to

Enabled

, the Resume by Alarm function becomes unavailable.

Soft-Off by PWR-BTTN

Configures the way to turn off the computer in MS-DOS mode using the power button.

Instant-Off

Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.

Resume by Alarm

Determines whether to power on the system at a desired time. (Default: Disabled)

If enabled, set the date and time as following:

Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.

Power Loading

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing

it to shutdown or fail. If this occurs, please set to

Enabled

Auto

lets the BIOS automatically configure this

setting. (Default: Auto)

- 37 -

Содержание Z590 AORUS ULTRA





























































Результаты поиска

Содержание Z590 AORUS ULTRA

Отзывы:

Похожие инструкции для Z590 AORUS ULTRA

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY Z590 AORUS ULTRA, Руководство пользователя

Результаты поиска

Содержание Z590 AORUS ULTRA

Отзывы:

Похожие инструкции для Z590 AORUS ULTRA

Бренды по названию

Популярные бренды