BIOS Setup
- 80 -
2-8-6 Intel MRC POST Codes
2-8-7 Intel MRC Error Codes
SAD setup error
RC Behavior: System Halt
0xDB
Unsupported topology
RC Behavior: System Halt
0xDC
SBSP cannot find KPIRC TXEQ Parameters for this
link in GetSocketLinkEparams(). No retry.
RC Behavior: System Halt
0xDD
Detect DIMM population
0xB0
Set DDR frequency
0xB1
Gather remaining SPD data
0xB2
Program registers on the memory controller level
0xB3
Evaluate RAS modes and save rank information
0xB4
Program registers on the channel level
0xB5
DDRIO Initialization
0xB6
Train DDR
0xB7
Initialize CLTT/OLTT
0xB8
Hardware memory test and init
0xB9
Execute memory init
0xBA
Program memory map and interleaving
0xBB
Program RAS configuration
0xBC
Rank margin tool
0xBD
MRC is done
0xBF
No memory was detected
0xE8
Memory test failure
0xEB
Different dimm types are detected installed in the system
0xED
Number of HAs found in system greater than
MAX_HA defined in MRC build
0xEE
Indicates a CLTT table structure error
0xEF
Invalid VR mode, unable to set DRAM VDD
0xF0
Failure occurred reserving memory for IOT
0xF1
Reference code assert
0xF2
Unsupported MC frequency set
0xF3
Unable to get current MC frequency
0xF4
