Hardware Installation
- 16 -
1-6 Back Panel Connectors
u
Serial Port
Connects to serial-based mouse or data processing devices.
v
RJ-45 LAN Port #2
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
w
RJ-45 LAN Port #1 (Shared NIC port)
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
x
Server Management LAN Port
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
y
USB 3.0 Port
The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
z
VGA Port
The video-in port allows connection via video in, which can also apply to the video loop thru function.
{
ID button with LED
When the system identification is active, the ID LED on the front/ back panel glows blue.
v
w
x
z
Link/Activity LED
Connection/
Speed LED
LAN Port
•
When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
•
When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Activity LED:
Connection/Speed LED:
State
Description
Yellow On
1 Gbps data rate
Green On
100 Mbps data rate
Off
10 Mbps data rate
State
Description
Blinking Data transmission or receiving is occurring
Off
No data transmission or receiving is occurring
u
y
{
