GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT Скачать руководство пользователя страница 55

Страница: 55 / 132

- 55 -

BIOS Setup

Execute Disable Bit

(Note)

Enables or disables Intel

Execute Disable Bit function. This function may enhance protection for the

computer, reducing exposure to viruses and malicious buffer overlow attacks when working with its

supporting software and system. (Default: Enabled)

Intel Virtualization Technology

(Note)

Enables or disables Intel

Virtualization Technology. Virtualization enhanced by Intel

Virtualization

Technology will allow a platform to run multiple operating systems and applications in independent partitions.

With virtualization, one computer system can function as multiple virtual systems. (Default: Enabled)

Intel TXT(LT) Support

(Note)

Enables or disables Intel

Trusted Execution Technology (Intel

TXT). Intel

Trusted Execution Technology

provides a hardware-based security foundation. (Default: Disabled)

Dynamic Storage Accelerator

Enables or disables Intel

Dynamic Storage Accelerator. When enabled, the hard drive I/O performance

will be adjusted according to hard drive load. (Default: Disabled)

VT-d

(Note)

Enables or disables Intel

Virtualization Technology for Directed I/O. (Default: Enabled)

Windows 8 Features

Allows you to select the operating system to be installed. (Default: Other OS)

CSM Support

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.

Always

Enables UEFI CSM. (Default)

Never

Disables UEFI CSM and supports UEFI BIOS boot process only.

This item is conigurable only when

Windows 8 Features

is set to

Windows 8

Boot Mode Selection

Allows you to select which type of operating system to boot.

UEFI and Legacy

Allows booting from operating systems that support legacy option ROM or UEFI

option ROM. (Default)

Legacy Only

Allows booting from operating systems that only support legacy Option ROM.

UEFI Only

Allows booting from operating systems that only support UEFI Option ROM.

This item is conigurable only when

CSM Support

is set to

Always

LAN PXE Boot Option ROM

Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)

This item is conigurable only when

CSM Support

is set to

Always

Storage Boot Option Control

Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.

Disabled

Disables option ROM.

Legacy only

Enables legacy option ROM only. (Default)

UEFI only

Enables UEFI option ROM only.

Legacy First

Enables legacy option ROM irst.

UEFI First

Enables UEFI option ROM irst.

This item is conigurable only when

CSM Support

is set to

Always

(Note) This item is present only when you install a CPU that supports this feature. For more information about

Intel

CPUs' unique features, please visit Intel's website.

Содержание GA-Z97X-Gaming GT





































































































































Результаты поиска

Содержание GA-Z97X-Gaming GT

Отзывы:

Похожие инструкции для GA-Z97X-Gaming GT

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT, Руководство пользователя

Результаты поиска

Содержание GA-Z97X-Gaming GT

Отзывы:

Похожие инструкции для GA-Z97X-Gaming GT

Бренды по названию

Популярные бренды