GIGA-BYTE TECHNOLOGY GA-MA78GM-US2H Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 100

background image

GA-MA78GM-US2H Motherboard

- 64 -

4-2-1 Updating the BIOS with the Q-Flash Utility

A. Before You Begin:

1. From GIGABYTE's website, download the latest compressed BIOS update file that matches your

motherboard model.

2. Extract the file and save the new BIOS file (e.g. MA78GUS2.F1) to your floppy disk, USB flash

drive, or hard drive. Note: The USB flash drive or hard drive must use FAT32/16/12 file system.

3. Restart the system. During the POST, press the <End> key to enter Q-Flash. Note: You can

access Q-Flash by either pressing the <End> key during the POST or pressing the <F8> key in
BIOS Setup. However, if the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard
drive attached to an independent IDE/SATA controller, use the <End> key during the POST to
access Q-Flash.

Because BIOS flashing is potentially risky, please do it with caution. Inadequate BIOS
flashing may result in system malfunction.

Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2008, Award Software, Inc.

GA-MA78GM-US2H E1c
.
.
.
.

<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash
11/26/2008-RS780-SB700-6A66AG0YC-00

4-2

BIOS Update Utilities

GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash

TM

and @BIOS

TM

. GIGABYTE

Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-
DOS mode. Additionally, this motherboard features the DualBIOS

TM

design, which enhances protection

for the safety and stability of your computer by adding one more physical BIOS chip.

What is DualBIOS

TM

?

Motherboards that support DualBIOS have two BIOS onboard, a main BIOS
and a backup BIOS. Normally, the system works on the main BIOS.

However, if the main BIOS is corrupted or damaged, the backup BIOS will take over on the next system
boot and copy the BIOS file to the main BIOS to ensure normal system operation. For the sake of
system safety, users cannot update the backup BIOS manually.

What is Q-Flash

TM

?

With Q-Flash you can update the system BIOS without having to enter
operating systems like MS-DOS or Window first. Embedded in the BIOS, the

Q-Flash tool frees you from the hassles of going through complicated BIOS flashing process.

What is @BIOS

TM

?

@BIOS allows you to update the system BIOS while in the Windows
environment. @BIOS will download the latest BIOS file from the nearest

@BIOS server site and update the BIOS.

«
...
62
63
64
65
66
...
»

Содержание GA-MA78GM-US2H





































































































Отзывы:

Нет отзывов

Похожие инструкции для GA-MA78GM-US2H

Бренд: Uctronics Страницы: 27

Бренд: Advantech Страницы: 3

B360 GAMING PLUS

Бренд: MSI Страницы: 112

Бренд: Supero Страницы: 86

35891900 Series

Бренд: PC Partner Страницы: 16

Бренд: IBASE Technology Страницы: 60

Бренд: AMD Geode Страницы: 51

Бренд: Raider Outboards Страницы: 73

Бренд: Analog Devices Страницы: 17

Бренд: Unicorn Computer Страницы: 36

Бренд: Linear Страницы: 16

Бренд: Gigabyte Страницы: 31

THUNDER I7501 XTREME

Бренд: TYAN Страницы: 48

K10N750SLI-WIFI

Бренд: ASROCK Страницы: 264

Бренд: Texas Instruments Страницы: 7

Бренд: ASROCK Страницы: 38

Бренд: TYAN Страницы: 35

Бренд: TYAN Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды