GIGA-BYTE TECHNOLOGY GA-H97M-HD3, Руководство пользователя

Страница: 22 / 40

- 22 -
`
PC Health Status
&
Reset Case Open Status
Disabled Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled Clears the record of previous chassis intrusion status and the
Case Open ield will
show "No" at next boot.
&
Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header
. If the system chassis cover is removed, this ield will show
"Yes" , otherwise it will show "No" . To
clear the chassis intrusion status record, set
Reset Case Open Status
to Enabled , save the settings to
the CMOS, and then restart your system.
&
CPU Vcore/CPU VRIN/DRAM V3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
&
CPU/System Temperature
Displays current CPU/system temperature.
&
CPU/System FAN Speed
Displays current CPU/system fan speeds.
&
CPU/System Temperature Warning
Sets the warning threshold for CPU/system temperature. When temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
&
CPU/System Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connection when this occurs. (Default: Disabled)
&
CPU Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the CPU temperature. You can
adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
&
Fan Speed Percentage
Allows you to control the fan speed. This item is conigurable only when
CPU Fan Speed Control is set
to Manual . Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
&
System Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the system temperature. You can
adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
&
Fan Speed Percentage
Allows you to control the fan speed. This item is conigurable only when
System Fan Speed Control is
set to Manual . Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.