(Note) This item is present only when you install a CPU that supports this feature.
&
UMA Frame Buffer Size
(Note)
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller.
MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 32M, 64M, 128M,
256M, 512M, 1G, 2G.
&
SATA Mode
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
RAID
Enables RAID for the SATA controller.
AHCI
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
&
NVMe RAID mode (M2F_32G Connector)
Allows you to determine whether to use your M.2 NVMe PCIe SSDs to configure RAID. (Default: Disabled)
&
APU SATA Port Enable (M2F_32G Connector)
Enables or disables the SATA controller integrated in the CPU. (Default: Enabled)
&
Chipset SATA Port Enable (SATA3 0, 1, 2, 3 Connectors)
Enables or disables the SATA controller integrated in the Chipset. (Default: Enabled)
&
APU SATA Port 0 (M2F_32G Connector)
Displays the information of the connected M.2 SATA device. The information appears only when an M.2
SATA device is installed.
&
Chipset SATA Port 0/1/2/3 (SATA3 0, 1, 2, 3 Connectors)
Displays the information of the connected SATA device(s).
- 31 -
