`
Advanced Memory Settings
&
Extreme Memory Profile (X.M.P.)
(Note 2)
, System Memory Multiplier, Memory Frequency(Mhz)
The settings above are synchronous to those under the same items on the
Advanced Frequency Settings
menu.
&
Memory Timing Mode
Manual
and
Advanced Manual
allows the
Channel Interleaving
,
Rank Interleaving
, and memory timing
settings below to be configurable. Options are: Auto (default), Manual, Advanced Manual.
&
Profile DDR Voltage
When using a non-XMP memory module or
Extreme Memory Profile (X.M.P.)
is set to
Disabled
, the value
is displayed according to your memory specification. When
Extreme Memory Profile (X.M.P.)
is set to
Profile1
or
Profile2
, the value is displayed according to the SPD data on the XMP memory.
`
Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus
Drive Strength, Data Bus Configuration
These sections provide memory timing settings. The respective timing setting screens are configurable
only when
Memory Timing Mode
is set to
Manual
. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
`
Advanced Voltage Settings
This sub-menu allows you to set CPU, chipset and memory voltages.
`
PC Health Status
&
Reset Case Open Status
Disabled
Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled
Clears the record of previous chassis intrusion status and the
Case Open
field will
show "No" at next boot.
&
Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set
Reset Case Open Status
to
Enabled
, save the settings to
the CMOS, and then restart your system.
&
CPU Vcore/CPU VDDP/DRAM Channel A/B V3.3V/+5V/+12V/VCORE SOC
Displays the current system voltages.
`
Miscellaneous Settings
&
PCIe Slot Configuration
Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation
mode is subject to the hardware specification of each slot.
Auto
lets the BIOS automatically configure this
setting. (Default: Auto)
&
3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
- 23 -
