GIGA-BYTE TECHNOLOGY GA-A320-DS3 Скачать руководство пользователя

Страница: 6 / 39

1-2 Product Specifications

CPU

AM4 Socket:

- AMD Ryzen

™

processor

- AMD 7th Generation A-series/Athlon

™

processors

(Go to GIGABYTE's website for the latest CPU support list.)

Chipset

AMD A320

Memory

2 x DDR4 DIMM sockets supporting up to 32 GB of system memory

Dual channel memory architecture

Support for DDR4 2667

(Note)

/2400/2133 MHz memory modules

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

Maximum shared memory of 2 GB

Audio

Realtek

ALC887 codec

High Definition Audio

2/4/5.1/7.1-channel

* To configure 7.1-channel audio, you have to use an HD front panel audio module

and enable the multi-channel audio feature through the audio driver.

Support for S/PDIF Out

LAN

Realtek

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

(Note)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

(Note)

(The PCIEX16 and PCIEX4 slots conform to PCI Express 3.0 standard.)

2 x PCI Express x1 slots

(The PCI Express x1 slots conform to PCI Express 2.0 standard.)

2 x PCI slots

Multi-Graphics

Technology

Support for AMD Quad-GPU CrossFire

™

and 2-Way AMD CrossFire

™

technologies

Storage Interface

4 x SATA 6Gb/s connectors

Support for RAID 0, RAID 1, and RAID 10

USB

Chipset:

- 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel

2 x USB 3.1 Gen 1 ports (available through the internal USB header)

- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through

the internal USB headers)

CPU:

- 3 x USB 3.1 Gen 1 ports on the back panel

(Note) Actual support may vary by CPU.

- 6 -

Содержание GA-A320-DS3








































Результаты поиска

Содержание GA-A320-DS3

Отзывы:

Похожие инструкции для GA-A320-DS3

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY GA-A320-DS3, Руководство пользователя

Результаты поиска

Содержание GA-A320-DS3

Отзывы:

Похожие инструкции для GA-A320-DS3

Бренды по названию

Популярные бренды