GIGA-BYTE TECHNOLOGY B550M AORUS PRO Скачать руководство пользователя страница 30

Страница: 30 / 44

USB Configuration

Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

XHCI Hand-off

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off

support. (Default: Enabled)

USB Mass Storage Driver Support

Enables or disables support for USB storage devices. (Default: Enabled)

Port 60/64 Emulation

Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support

for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.

(Default: Disabled)

Mass Storage Devices

Displays a list of connected USB mass storage devices. This item appears only when a USB storage device

is installed.

NVMe Configuration

Displays information on your M.2 NVME PCIe SSD if installed.

Super IO Configuration

Serial Port

Enables or disables the onboard serial port. (Default: Enabled)

SATA Configuration

SATA Mode

Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers

to AHCI mode.

RAID

Enables RAID for the SATA controller.

AHCI

Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

NVMe RAID mode

Allows you to determine whether to use your M.2 NVMe PCIe SSDs to configure RAID. (Default: Disabled)

Chipset SATA Port Enable

Enables or disables the integrated SATA controllers. (Default: Enabled)

Chipset SATA Port 0/1/2/3

Displays the information of the connected SATA device(s).

Network Stack Configuration

Network Stack

Disables or enables booting from the network to install a GPT format OS, such as installing the OS from

the Windows Deployment Services server. (Default: Disabled)

IPv4 PXE Support

Enables or disables IPv4 PXE Support. This item is configurable only when

Network Stack

is enabled.

IPv4 HTTP Support

Enables or disables HTTP boot support for IPv4. This item is configurable only when

Network Stack

enabled.

IPv6 PXE Support

Enables or disables IPv6 PXE Support. This item is configurable only when

Network Stack

is enabled.

- 30 -

Содержание B550M AORUS PRO













































Результаты поиска

Содержание B550M AORUS PRO

Отзывы:

Похожие инструкции для B550M AORUS PRO

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY B550M AORUS PRO, Руководство пользователя

Результаты поиска

Содержание B550M AORUS PRO

Отзывы:

Похожие инструкции для B550M AORUS PRO

Бренды по названию

Популярные бренды