GIGA-BYTE TECHNOLOGY B550M AORUS PRO Скачать руководство пользователя страница 35

Страница: 35 / 44

VGA Support

Allows you to select which type of operating system to boot.

Auto

Enables legacy option ROM only.

EFI Driver

Enables EFI option ROM. (Default)

This item is configurable only when

Fast Boot

is set to

Enabled

Ultra Fast

USB Support

Disabled

All USB devices are disabled before the OS boot process completes.

Full Initial

All USB devices are functional in the operating system and during the POST.

(Default)

Partial Initial

Part of the USB devices are disabled before the OS boot process completes.

This item is configurable only when

Fast Boot

is set to

Enabled

. This function is disabled when

Fast Boot

is set to

Ultra Fast

NetWork Stack Driver Support

Disabled

Disables booting from the network. (Default)

Enabled

Enables booting from the network.

This item is configurable only when

Fast Boot

is set to

Enabled

Ultra Fast

CSM Support

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.

Disabled

Disables UEFI CSM and supports UEFI BIOS boot process only.

Enabled

Enables UEFI CSM. (Default)

LAN PXE Boot Option ROM

Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)

This item is configurable only when

CSM Support

is set to

Enabled

Storage Boot Option Control

Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.

Disabled

Disables option ROM.

UEFI Only

Enables UEFI option ROM only. (Default)

Legacy Only

Enables legacy option ROM only.

This item is configurable only when

CSM Support

is set to

Enabled

Other PCI Device ROM Priority

Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other

than the LAN, storage device, and graphics controllers.

Disabled

Disables option ROM.

UEFI Only

Enables UEFI option ROM only. (Default)

Legacy Only

Enables legacy option ROM only.

This item is configurable only when

CSM Support

is set to

Enabled

Administrator Password

Allows you to configure an administrator password. Press <Enter> on this item, type the password, and

then press <Enter>. You will be requested to confirm the password. Type the password again and press

<Enter>. You must enter the administrator password (or user password) at system startup and when entering

BIOS Setup. Differing from the user password, the administrator password allows you to make changes to

all BIOS settings.

- 35 -

Содержание B550M AORUS PRO













































Результаты поиска

Содержание B550M AORUS PRO

Отзывы:

Похожие инструкции для B550M AORUS PRO

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY B550M AORUS PRO, Руководство пользователя

Результаты поиска

Содержание B550M AORUS PRO

Отзывы:

Похожие инструкции для B550M AORUS PRO

Бренды по названию

Популярные бренды