Giga-Byte Communications GA-7VT600-L, Руководство пользователя

Страница: 94 / 112

- 90 - GA-7VT600-P(-L) Motherboard
English
B-3. Select Boot Array
User can select a disk array as boot device if user wants to boot operating system from an array.
Boot disk array cannot be selected if the operating system does not boot from the disk array. Highlight
the
Select Boot Array item; press <Enter> and the channel column will be activated. Then highlight
the target disk array and press <Enter>. If user selects a disk array that has a boot mark and press
<Enter>, its boot setting will be canceled.
VIA Technologies,Inc. VIA VT8237 Serial ATA BIOS Setting Utility V1.20
Set/Clear bootable array
F1 : View Array/disk Status
K K K K K , L L L L L : Move to next item
Enter : Confirm the selection
ESC : Exit
X X X X X Create Array
X X X X X Delete Array
X X X X X Create/Delete Spare
X X X X X Select Boot Array
X X X X X Serial Number View
Channel Driver Name Array Name Mode Size(GB) Status
[*]Serial_Ch0 Master ST380013AS SATA 74.53 Stripe0
[*]Serial_Ch1 Master ST9120023AS SATA 111.79 Stripe1
B-4. View Serial Number of Hard Drive
Highlight Serial Number View and press <Enter>. Use arrow key to select a drive, the selected
drive.s serial number can be viewed in the last column. The serial number is assigned by the disk
drive manufacturer.
B-5. View Array Status
Press the F1 key to show the array status on the lower screen. If there are no disk arrays then nothing
will be displayed on the screen.
VIA Technologies,Inc. VIA VT8237 Serial ATA BIOS Setting Utility V1.20
Create a RAID array with the hard disks
attached to VIA IDE controller
F1
: View Array/disk Status
K K K K K , L L L L L : Move to next item
Enter : Confirm the selection
ESC : Exit
Array Name Array Mode Block Size(GB) Size(GB)
ARRAY0 Stripe 64K 149.06
X X X X X Create Array
X X X X X Delete Array
X X X X X Create/Delete Spare
X X X X X Select Boot Array
X X X X X Serial Number View