background image

- 42 -

GA-7VT600-P(-L) Motherboard

English

)

)

)

)

)

OnBoard Parallel port

This feature allows you to select from a given set of parameters if the parallel port uses the
onboard I/O controller.

378/IRQ7

Enable onboard LPT port and address is 378, Using IRQ7.(Default value)

278/IRQ5

Enable onboard LPT port and address is 278, Using IRQ5.

3BC/IRQ7

Enable onboard LPT port and address is 3BC, Using IRQ7.

Disabled

Disable onboard parallel port.

)

)

)

)

)

Parallel Port Mode

This feature allows you to connect with an advanced print via the port mode it supports.

SPP

Using Parallel  port as Standard Parallel Port using IRQ7. (Default value)

EPP

Using Parallel port as Enhanced Parallel Port IRQ5.

ECP

Using Parallel port as Extended Capabilities Port using IRQ7.

ECP+EPP

Using Parallel port as ECP & EPP mode.

)

)

)

)

)

Game Port Address

Disabled

Disabled this function.

201

Set Game Port Address to 201. (Default value)

209

Set Game Port Address to 209.

)

)

)

)

)

Midi Port Address

Disabled

Disabled this function. (Default value)

300

Set Midi Port Address to 300.

330

Set Midi Port Address to 330.

)

)

)

)

)

Midi Port IRQ

5

Set 5 for Midi Port IRQ.

10

Set 10 for Midi Port IRQ. (Default value)

Содержание GA-7VT600-L

















































































































Отзывы: