background image

- 40 -

GA-7VT600-P(-L) Motherboard

English

)

)

)

)

)

OnChip IDE Channel0

When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card
is used, set at Disabled.

Enabled

Enable onboard 1st channel IDE port. (Default value)

Disabled

Disable onboard 1st channel IDE port.

)

)

)

)

)

OnChip IDE Channel1

When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller
card is used, set at Disabled.

Enabled

Enable onboard 2nd channel IDE port. (Default value)

Disabled

Disable onboard 2nd channel IDE port.

)

)

)

)

)

OnChip Serial ATA

Enabled

Enable onboard VT8237 Serial ATA support. (Default value)

Disabled

Disabled VT8237 Serial ATA support.

)

)

)

)

)

AC97 Audio

Enabled

BIOS will automatically detect onboard AC97 Audio. (Default value)

Disabled

Disabled AC97 Audio.

)

)

)

)

)

VIA Onboard  LAN *

Enabled

Enable VIA Onboard LAN function. (Default value)

Disabled

Disable this function.

)

)

)

)

)

USB 1.1 Controller

Disable this option if you are not using the onboard USB feature.

Enabled

Enabled USB Controller. (Default value)

Disabled

Disabled USB Controller.

)

)

)

)

)

USB 2.0 Controller

Disable this option if you are not using the onboard USB 2.0 feature.

Enabled

Enabled USB 2.0 Controller. (Default value)

Disabled

Disabled USB 2.0 Controller.

" * " For GA-7VT600-P-L only.

Содержание GA-7VT600-L

















































































































Отзывы: