Subject to alterations, 01.09.21
17/32
Start-up and calibration
High load preset
Start identifier for curve programming - Calibration with flame
Action button
Display
Description
Set the high load air flap.
Hold down
button A
and set the value with the
-
or + button
.
Move to the next curve point.
Action button
Display
Description
When heat demand is present.
Confirm with
i/reset button
.
Burner start with pre-ventilation.
Blower start-up and safety valve ON
Run in pre-ventilation position
Pre-ventilation
If the leakage check is activated, Ph80, Ph81, Ph82 and Ph83 are displayed first.
/reset
