Gicam RQA, Инструкция по установке и эксплуатации

Страница: 11 / 24

Pagina – page – Seite 9
Installation manual
Technical specification
Power supply 24 V direct current ± 10 % protected against inversion of polarity.
Protection resettable fuse
Maximum power consumption 1 Watt
Insulation Class II
Installation category Category II
Storage temperature -4 °F / 140 °F
Operating temperature 14 °F / 122 °F
Humidity maximum 85% non-condensing
LED 2 LED with 3 mm (function status)
Keyboard 3 keys (behind red front cover)
Overall dimensions 4.33 x 4.72 x 0.90 in including terminal blocks
Installation Support for DIN or OMEGA rail
Material of housing Blend ABS/PC self-extinguishing
Wire connections Removable screw terminals, pitch terminal blocks 5,08 mm
Load cells input Maximum 4 load cells with 350 Ω in parallel (or 8 cells with 700 Ω)
Power supply cells 4 Volt direct current
Linearity 0,01 % of full scale
Internal resolution 16 – 24 bit
Temperature deviation < 0,001 % of full scale/°C
Measuring range From -2,6 mV/V to +2,6 mV/V
Digital filter Selectable 0.1 Hz – 50 Hz
Weight decimals from 0 to 3 decimal numbers
Calibration Zero and full scale executable through buttons
Cell cable break check always present
Analog exit in tension ± 10 V / ± 5 V
Resolution 16 bit
Calibration digital through buttons
Impedance ≥ 10 kΩ
Linearity 0,03 % of full scale
Temperature deviation < 0,002 % of full scale/°C
Analog exit in current 0 – 20 A / 4 – 20 mA
Resolution 16 bit
Calibration digital through buttons
Impedance ≤ 300 Ω
Linearity 0,03 % of full scale
Temperature deviation < 0,002 % of full scale/°C
Compliance to EMC norms EN61000-6-2, EN61000-6-3
Compliance electric safety EN61010-1