GIC 151A12B, Инструкция по эксплуатации

Страница: 18 / 47

18
17.0 PROGRAMMING:
Follow given procedure to program the device:
1. Press key ‘E’ to enter menus. ‘PV’ display shows “codE”, which is blinking and ‘SV’
display shows “0”.
2. Enter code as “69” using ‘UP’ key. Press key ‘E’ to enter into menu. If wrong code is
entered, then the device exits from programming mode. If correct code is entered,
the device enters into the set of menus.
3. Using ‘UP’ or ‘DN’ Key we can move to desired set of parameter.
4. Press key ‘E’, to enter the group of parameters related to the main menu. Here, the
‘PV’ display shows the menu and ‘SV’ shows the value programmed on it.
5. To change this value, press key ‘E’. Using ‘UP’ or ‘DN’ key, select the value to be
entered. Press key ‘E’ to confirm the value or key ‘C’ to maintain the previous value.
6. Whenever the value of the menu is being edited, the 'PV' display blinks. Here, 'UP’
and 'DN’ key change the value on ‘SV’ display. When the display is not blinking, we can
move to next menu using ‘UP’ or ‘DN’ key. To exit from the menu press key ‘C’.
7. Key ‘C’ acts as exit key when in programming mode. While on main screen, when
'PV' displa shows temperature and ‘SV’ display shows user configured value, it performs
the function as configured on it in the “key” parameter of “conF” menu.
18.0 SEVEN SEGMENT DISPLAY:
A B C D E F G H
       
I J K L M N O P
       
Q R S T U V W X
       
Y Z
 
19.0 MENUS:
MAIN MENU: sP (Set point)
Parameter Description
1 SPLL Set point low level
Range: -1999 to set point active
default: -1999
2 SPhL Set point high level
Range: Set point active to 9999
default: 9999
3 nSP#
5,6,7,8
No. of. Set point
Range: 1 to 4
default: 4