GiantArm D200, Руководство пользователя

Страница: 54 / 99

54
c. Fill angle: By default the infill pattern runs at 45° to the model to provide the best adhesion to wall
structures. Infill extrusions that run adjacent to perimeters are liable to delaminate under stress. Some
models may benefit from rotating the fill angle to ensure the optimal direction of the extrusion.
d. Fill Pattern: It is the pattern of filling shape which effects printing duration.
Easy Print 3D offers seven infill patterns, including four regular flavors, and three more exotic ones. The
numbers on the right of each figure are a rough estimate of material used and time taken for a simple 20mm
cube model. Note that this is only indicative, as model complexity and other factors will affect time and
material.
1. Line
：
350.57mm/5m: 23s
2. Rectilinear