Giant NeosGPS, Руководство по эксплуатации

Страница: 11 / 24

Altitude Calibration
You may calibrate the current altitude.
Start Biking
You may select bikes to enable and modify wheel diameter.
1. Press to enter the setup page.
2. Press to select ALT, press and the ALT setup page
will display.
3. Press to select the desired number, press to
validate the selection made and proceed to the next
one. Repeat the above steps to complete the setting.
1. Press to enter the setup page.
2. Press to select BIKE, press and the BIKE setup page
will display.
3. Press to select BIKE1 or BIKE2, press to validate the
selection made.
4. The wheel diameter page of the NeosGPS will display,
press to select the desired number, press to validate
the selection made and proceed to the next one. Repeat
the above steps to complete the setting.
Press to return to the main setup page if no changes
are required and press again to exit.
4. Once all settings have been made, press to
validate the selections made and press to exit.
5. Once all settings have been made, press to validate
the selections made and exit back to the main setup
page and press to exit.
0~9
0~9
0~9
0~9
11 Setup
OK
Note: Once the current altitude value in Settings is changed its counterpart in the
stopwatch mode will change accordingly.
Note: Please refer to "Wheel Diameter and Circumference"
on page 24 for details on wheel dimension.
Select
Number
- or 0
0~9
0~9
0~9
0~9
OK
Select
Number