Giant NeosGPS, Руководство по эксплуатации

Страница: 10 / 24

You may customize the following functions with the "Setup" function: unit of measure, daylight
saving time, current altitude, bike, wheel diameter, sensor pairing and odometer.
Unit of Measure
You may choose KM/H or MI/H for UOM display.
1. Press to enter the UNIT setup page.
2. Press -> and
3. Press to validate the selection made.
4. Press to exit setup.
1. Press to enter the setup page.
2. Press to select HOUR, press and the HOUR
setup page will display.
3. Press to select 12h or 24h, press to validate the
selection made.
4. The daylight saving time page of the NeosGPS
display, press to select the desired number, press
to validate the selection made and proceed to the
next one. Repeat the above steps to complete the
setting. Press to return to the main setup page if
no changes are required and press again to exit.
5. Once all settings have been made, press to
validate the selections made and exit back to
the main setup page and press to exit.
Setup
10 Setup
- or 0
1 or 2
00 or 30
Select
Number
Time Display
You may select 12 or 24 hour time format and set up daylight saving time here.