Giant J3-90, Инструкция по эксплуатации

Страница: 10 / 21

www.valuehobby.com/j3-90.html
Section3. Wing Strut Installation
Step1. Put the wing strut and center strut support in
place and mark the location where the strut
support is against the strut.
Step2. Install the center strut support to the wing
strut using M2.5x12mm self-tapping socket head
screws.
Step3. Install the strut support to the wing using
M2.5x12mm self-tapping socket head screws.
Step4. Install the wing strut to the wing using
M3x10 socket head screws.
Section4. Main landing gear
Installation
Step1. Attach the axle to each landing gear leg with
the included two M6 locknuts. Use threadlock when
assembling the axle.
Step2. Attach the wheel to the axle using two wheel
collars and grub screws.
Step3. Repeat Steps 1 and 2 for the remaining
wheel.