Giant GP8135A, Инструкция по эксплуатации / Руководство по ремонту и обслуживанию

Страница: 5 / 12

5
Specifications
Model GP8140A
U.S. .....................................(Metric)
Flow ................................................................. up to 39.6 GPM* ................. (150 LPM)*
Discharge Pressure ......................................... up to 5510 PSI* ...................(380 bar)*
Maximum Crankshaft Speed ........................................................................ 580 RPM*
Power Consumption ........................................ 94 BHP ................................70 kW
Inlet Pressure .................................................. Up to 145 PSI ....................(10 bar)
Plunger Diameter ............................................. 1.57” .................................... 40 mm
Plunger Stroke ................................................. 2.83” ....................................72 mm
Pinion Shaft Diameter ...................................... 1.77” .................................... 45 mm
Fitting Key .................................................................................................... 14 mm x 70 mm
Crankshaft Mounting ....................................................................................Either side
Pinion Shaft Rotation ....................................................................................Towards Gear End of pump
Temperature of Pumped Fluids ....................... Up to 86
o
F .........................(30
o
C)
Inlet Ports .....................................................................................................(2) 2” NPT
Discharge Ports ............................................................................................(2) 1” NPT
Weight ............................................................. 800 lbs. ...............................(363 kg)
Crankcase Oil Capacity ................................... 4.2 Gal. ..............................(16.0 liters)
Fluid End Material .........................................................................................Stainless Steel
NPSHR ............................................................ 24.6 ft.-head ........................ 7.5 mWs
Based on driver type, input speeds may vary.
* Do not exceed 94 BHP (70 kW).
Consult the factory for special requirements that must be met if the pump is to
operate beyond one or more of the limits specified above.
HORSEPOWER RATINGS:
The rating shown are the power require-
ments for the pump. Gas engine power outputs
must be approximately twice the pump power
requirements shown above.
We recommend a 1.15 service factor be
specified when selecting an electric motor as the
power source.
To compute specific pump horsepower
requirements, use the following formula:
GPM X PSI
1450
SPECIAL NOTE:
The theoretical gallons per revolution (gal/rev) is
0.068.
To find specific outputs at various RPM, use the
formula:
GPM = 0.068 x RPM
GP8140 HORSEPOWER
REQUIREMENTS
RPM GPM 1000 PSI 2500 PSI 3500 PSI 5510 PSI
300 20.5 14.1 35.3 49.5 77.9
362 24.7 17.0 42.6 59.6 93.9
500 34.1 23.5 58.8 82.3 N/A
580 39.6 27.3 68.3 N/A N/A
GP8140 Gear Ratios
Gear Ratio Input Speed
2.6:1 1500 RPM
3.1:1 1800 RPM
3.8:1 2200 RPM
4.5:1 2600 RPM
= HP