background image

• Do not use DuPont™ VELPAR® DF in low desert valleys

in California or Arizona.

• Do not add a surfactant to VELPAR® DF when treating

nondormant alfalfa.

• Do not use VELPAR® DF on gravelly or rocky soils,

exposed subsoils, hardpan, sand, poorly drained soil, or
alkali soils.

• Crop injury, including mortality, may result in fields with

restricted root growth due to nonuniform soil profiles such
as gravel bases and clay lenses. 

• Do not graze or feed forage or hay to livestock within 30

days following application.

SEED ALFALFA (CALIFORNIA ONLY)

- ADDITIONAL USE PRECAUTIONS

• Do not use VELPAR® DF on fields with sandy loam or

loamy sand soils having less than 1% organic matter.

• Do not exceed 2/3 lb per acre on fields with sandy loam or

loamy sand soils having 1–2% organic matter.

• Do not exceed 2/3 lb per acre on seed alfalfa that has been

established for only one growing season.

Dry bulk fertilizer may be impregnated or coated with
VELPAR® DF for application to established alfalfa. All
recommendations, cautions and special precautions on this label
must be followed along with state regulations relating to dry
bulk fertilizer blending, impregnating and labeling. 

If fertilizer materials are excessively dusty, use a suitable
additive to reduce dust prior to impregnation, as dusty fertilizer
will result in poor distribution during application. The dry
fertilizer must be properly impregnated and uniformly applied to
the alfalfa to avoid crop injury and/or poor weed control.

To impregnate the fertilizer, use a system consisting of a
conveyor or closed drum used to blend dry bulk fertilizer. Any
commonly used fertilizer can be impregnated with VELPAR®
DF, except potassium nitrate or sodium nitrate. Do not use
VELPAR® DF on limestone.
Use a minimum of 250 lb dry bulk fertilizer per acre and up to
a maximum of 450 lb per acre. To impregnate or coat the dry
bulk fertilizer with VELPAR® DF, mix 2 2/3 pounds of
VELPAR® DF with sufficient water to make one gallon of
suspension and thoroughly agitate. Direct the nozzles to
deliver a fine spray of this suspension toward the fertilizer for
thorough coverage while avoiding spray contact with mixing
equipment. Uniform impregnation of VELPAR® DF to dry
bulk fertilizer will vary, and if the absorptivity is not
adequate, the use of an absorptive powder may be required to
produce a dry, free-flowing mixture. “Microcel E” is the
recommended absorbent powder. When another herbicide is
used with VELPAR® DF, mix and impregnate the fertilizer
immediately.

Apply impregnated fertilizer as soon as possible after impreg-
nation for optimum performance.

Select the rate of VELPAR® DF to apply per acre from the
appropriate section of this label. Then refer to the rate chart

below to determine the amount of VELPAR® DF that should
be impregnated on a ton of dry bulk fertilizer, based on the
amount of fertilizer to be distributed in one acre.

Rate Chart for Impregnating Fertilizer with VELPAR® DF

Fertilizer

VELPAR® DF Rate Per Acre

Rate/Acre

2/3 Lbs

1 Lbs

1 1/3 Lbs

2 Lbs

250 lbs

5.3 lbs/ton

8.0 lbs/ton

10.6 lbs/ton

16.0 lbs/ton

300 lbs

4.4 lbs/ton

6.6 lbs/ton

8.8 lbs/ton

13.3 lbs/ton

350 lbs

3.7 lbs/ton

5.7 lbs/ton

7.5 lbs/ton

11.4 lbs/ton

400 lbs

3.3 lbs/ton

5.0 lbs/ton

6.7 lbs/ton

10.0 lbs/ton

450 lbs

2.9 lbs/ton

4.4 lbs/ton

5.9 lbs/ton

8.9 lbs/ton

For rates other than those listed, use the following formula to
calculate the amounts of VELPAR® DF to be impregnated per
ton of dry fertilizer.

Lbs

Lbs 

VELPAR® DF  

X

             2000             =   VELPAR® DF Per

Per acre           Lbs Fertilizer Per Acre

Ton of Fertilizer 

APPLICATION

Uniform application of VELPAR® DF-impregnated dry
fertilizer is essential for satisfactory weed control. Accurate
calibration of the application equipment is essential for
uniform distribution to the surface. The recommended
method of application is to apply 1/2 the recommended rate
and overlap 50%. This results in the best distribution
pattern.

VELPAR® DF is recommended for control of certain weeds
where the following species are grown:

Do not use VELPAR® DF on Christmas trees in the following
states:
Alabama

Louisiana

New Jersey

Texas

Arkansas

Maine

New York

Vermont

Connecticut

Maryland

North Carolina Virginia

Delaware

Massachusetts

Pennsylvania

West Virginia

Georgia

Mississippi

Rhode Island

Florida

New Hampshire

South Carolina

APPLICATION TIMING

EASTERN US

Apply VELPAR® DF as a broadcast spray in the spring prior to
bud break. If application is made after bud break, use directional
spray equipment to prevent contact with foliage.

WESTERN US

Areas of greater than 20 inches annual rainfall - VELPAR® DF
may be applied as a broadcast spray in the spring prior to conifer
bud break. If application is made after bud break, use directional
spray equipment to prevent contact with foliage.

Austrian pine
Douglas fir

(western US only)

Grand fir
Loblolly pine

Noble fir
Ponderosa pine
Scotch pine
Sitka spruce

CHRISTMAS TREES

ALFALFA - IMPREGNATION ON 
DRY BULK FERTILIZER 

(EXCEPT

CALIFORNIA AND ARIZONA)

5

Содержание DuPontTM Velpar






















Отзывы: