Lift cover and install bags onto plate/channel
assembly by hooking slot in bag hanger onto
tabs in channel assembly.
Close cover and lock in place by hooking lock
knob into slot in cover latch arm.
3
unit assembly
Bagger Unit Installation - 3 Bag Units
(Cont.)
Install intake flange and inner deflector as
shown using four 5/16-18 x 1” hex bolts, flat
washers and nylon lock nuts. Tighten secure-
ly.
Note that the intake flange should be angled
downward.
Set cover on plate assembly, aligning hinges in
cover with hinges on plate. Secure with three
3/8 x 2-3/4” clevis pins and 1-3/4” oal bridge
pins.
12
GVTP ZVBB-R0203.1
