background image

 

 

 

 

 

5

 

maintenance 

 

GENERAL: 

 Follow 

implicitly

 the engine manufacturer’s recommendations for maintenance. 

 

  Always keep your machine clean - especially the engine.  Check all adjustments periodically.  Also, 

periodically check that all fasteners are secure.   

 

 

Never make any adjustments to the unit until the engine is 

off 

and the spark plug wire is disconnected. 

 

 

If carburetor adjustment is necessary, stand to one side and 

keep feet and hands

 in the clear while making 

adjustments. 

 

  Keep engine free of accumulations of grass, leaves or excessive grease.  An accumulation of these 

combustible materials may result in a fire. 

 

 

Store gasoline in a 

safe and approved

 container in a cool, dry place. 

 

 

Keep the unit and any fuel containers in locked storage to prevent children from playing and/or tampering 
with them. 

 

  Do not store gasoline powered equipment or fuel containers in a basement or any closed area where 

heating or heat appliances or open pilot lights are present, unless the fuel is completely drained from the 
power equipment and the fuel containers. 

 

LUBRICATION: 

 

The pneumatic tires on your blower contain bearings that should be lubricated on a weekly basis using a 
high-performance, automotive quality grease to ensure long life and minimal wear. 

 

TROUBLESHOOTING: 

 

UNIT WILL NOT START:

   

 

Check fuel and oil levels.   

 

Check to make sure choke is set when engine is cold, off when hot.   

 

Check throttle for proper operation.   

 

Check intake baffle for jammed debris or accumulation of debris.   

 

If condition persists, contact dealer. 

 

UNIT STALLS:

   

 

Check fuel and oil levels.   

 

Check intake baffle for jammed debris or accumulation of debris.  

 

If condition persists, contact dealer. 

Содержание LBWJ85171KH

















Отзывы: