Giant-Vac LBWJ85171KH, Руководство по сборке

Страница: 5 / 16

3
unit assembly
Note: Please refer to Parts List for correct part identification and placement. Please note that serrated
flange nuts may be used in place of split lock washers and hex nuts in some assembly steps.
FRONT WHEEL ASSEMBLY
•
Place Mounting Bracket against lower right
corner of Blower Housing, aligning holes in
bracket with threaded studs in housing. Secure
with three 3/8-16 hex nuts, split lock washers
and flat washers. Tighten securely.
•
Install Front Wheel between forks in bracket
and secure with 5/8-11 x 5” hex bolt and lock
nut. Tighten snugly while allowing for free
rotation of wheel.
HANDLE ASSEMBLY
•
The upper handles are shipped in the folded,
storage position. To unfold, loosen two handle
knobs and rotate up to the operating position.
The handles are secured in place with four
knobs. Insert two curved head bolts through the
holes in the handles. Place one 5/16 internal
tooth lock washer on each bolt. Thread knobs
onto bolts. Tighten all four knobs securely.
Assembly complete. Your unit is now ready to be started and checked for proper operation. Some
minor final adjustments may be required; see the Maintenance portion of this manual.