Copyright © Gianni industries, inc. All Rights Reserved.
P-MU-DG-200 Ver. A Publish: 2009.11.30 Page: - 2 -/ 5
II. Specifications:
Operating Voltage 12~24VAC/DC
Current Draw
＊
Holding : 22mA, Pull-In: 66mA@12VAC/DC
＊
Holding: 12mA, Pull-In: 32mA@24VAC/DC
Keypad 4X3 matrix backlit 12-digit (0~9,
＊
,
＃
)
Input
1 contact for Request-To-Exit button
1 contact for Door Reed Switch
Output 2 relays (N.O. / N.C. / Com. Dry contacts)
Relay Electric Current Max. 12A@14VDC, 7A@120VAC
Memory Volume 200+10 PINs
Relay Strike Time 01~99 seconds, Toggle mode(00)
LED Status Indication 3 LED indicators display (Red/Yellow/Green)
Ambient Humidity 5%~95% (Non-condensing)
Operating Temperature -20°C~+70°C
III. Status Indication & Default Setting Parameters:
Mode
Status
Green
First relay active
Red
Second relay active
LED
Yellow
Normal (Power On)
1 Short Beep
Key in
1 Long Beep
Valid PINs
2 Beeps
Enter / exit programming mode
3 Beeps
Incorrect input
Beep
5 Beeps
Reset master code to default value (12345),
clear all PINs
IV. Factory Default Setting:
Master Code 12345 (5 digits)
Relay Strike Time (Time Delay Setting) 5 seconds
Pressed Key Time Delay 5 seconds (Fixed)
Programming Mode Time Delay 25 seconds (Fixed)
PIN digits 5~8 digits
