Note (only for D.C. version):
the motor RPM depends on the voltage; higher voltage than 24V
could increase the RPM and so the maximum working pressure and
consequently also the usury
of the components in particular that one of the brushes.
The motor may become hot when running: pay attention.
The pump must be only repaired by competent or qualified personnel, using manufacturer’s
spares. If this procedure is not followed, the manufacturer declines any responsibility and the
guarantee insurance is invalid.
The self-priming capability depends on pipe diameter, lengths of horizontal suction pipe and
water level.
The maximum delivery depends on pipe diameter, suction lift, delivery head, head losses in the
suction / delivery pipelines.
Technical Specifications
This electric pump must be used with clean liquids in accordance with following:
Max static pressure admitted in the pump casing 8 Bar (6 Bar to 0.75Kw)
Max suction depth
7m (23 ft)
Liquid temperature
0 +50 °C (+32 +122 °F)
Maximum operating temperature
40 °C (104 °F)
Voltage variation tolerance
+10%
Protection index : Motor Control Press
12 /24 V C.C. IP 20 / 22 IP 65
230 V 1Ph C.A. IP 44 / 54 IP 65
230/ 400 V 3Ph C.A. IP 54 / 55 IP 65
Acoustic level
74 dB
Service
S1/S2 (see target plate)
Starting
Max 20/hour
