• To ensure long life of your Smoothie Blender, never run it continuously for longer than 60 seconds
• Never blend food that has formed a solid mass during freezing, break it up before adding to the
plastic jar
Cleaning
• Always switch off, unplug and dismantle before cleaning
• Never let the power unit, cord or plug get wet
• Empty the plastic jar before unscrewing it from the blade unit
• Always wash immediately after use. Don’t let food dry on to the plastic jar assembly as this will make
cleaning difficult
• The Smoothie Blender is NOT suitable to be cleaned in a dishwasher
• Regularly dismantle the tap and clean the parts thoroughly
Blender Unit
Before dismantling the blender, half fill the plastic jar with warm water. Fit the lid and cap then place
on the power unit. Switch to MIX and whilst running, open the tap and allow the water to drink into a
container to clean the valve. This can be repeated until the water runs clear. If further cleaning is
necessary, dismantle the unit first.
Power Unit
• Wipe with a damp cloth, then dry
Blade Unit
• Remove and wash the sealing ring
• Don’t touch the sharp blades - brush them clean using hot soapy water, then rinse thoroughly under
the tap. Don’t immerse the blade assembly in water
• Leave to dry upside down away from children
Lid, cap & stirrer
• Wash by hand, rince with clean water then dry
Cleaning the tap
• Remove the tap assembly from the plastic jar, then soak the tap in hot soapy water with the valve
open. Wash thoroughly then rinse and dry. Wash and dry the plastic jar then refit the tap ensuring that
the seals are correctly positioned on the plastic jar
Dismantling the tap
• Unscrew the cap
• Push up on the plug and remove lever
• Remove the plug and spring
• Wash all the components, then dry thoroughly
• Reassemble the unit be reversing the above procedure
4