2.
3. Assemble the remote control box
3.
3. Parts list:
Grounding
Inverter power switch
Power Indicator
Fault indicator
Remote controller interface
Dual USB ports
AC outlets
AC hard wire terminals
LCD display
Thermal control
cooling fan
DC input connector (+)
DC input connector (-)
Switch
Battery level
status
Power indicator
Fault indicator
Wire of remote
1.
DC Input Side
2.
AC Output side
Warning:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by operator. Guard against electric
shock. Do not open the metal case; risk of electric shock.
4. Assemble
1) The position of Mounting
First ensure that there is enough space to install the inverter, while the installation
location must meet the following requirements:
Drying: Do not use water or other liquids dripping on the inverter
Cool: a working environment temperature of the product is 0-40 , preferably a
temperature of 10-25
, at a temperature as low as possible within this range
Ventilation: There should be a certain distance between inverter and other objects, to
avoid blocking the products vents.
Clean: Do install the products in the dusty, wood chips or other particles , If cooling fan
is turned on, the particles involved in the inside of the product, thus affecting the
normal work.
While inverters and batteries connected, will produce arcs or sparks, so there should
not be around flammable objects such as gasoline, alcohol, etc.
2) Assemble the inverter For this big power inverter, because of the heavier weight,
preferably mounted on a solid platform, such as floor, table or mounting bracket fine. In
order to avoid falling off, platform for supporting the product should can bear the weight
of sufficient capacity, and it is good with four screws to secure the product.
Power Inverter With
Remote Controller