Specifications
Rated input voltage
Continuous power
Peak Power
Input voltage range
Input over voltage shutdown
Input low voltage shutdown
Input low voltage alarm
Output Voltage
Frequency
Wave form
Efficiency
Over heat protection
Over load protection
Short Circuit protection
Display
USB
Max no load current
Smart cooling fan
Working Temp.
Storage Temp.
Fuse
Size (L
W
H)
Weight
12VDC
5000W
10000W
9.8~16VDC
16VDC
9.8VDC
10.1VDC
24VDC
5000W
10000W
19.6~32VDC
32VDC
19.6VDC
20.2VDC
100V /
110V /
120V /
220V /
230V /
240V
Ac
10% (Refer to label)
50Hz /
60Hz
1Hz
Modified sine wave
About 90%
65
5
5400W
Yes
LCD
5V, 2.4Ax2
32~104
F
14~104
F
495
204
171mm
9.4Kg
3.5A
2A
The cooling fans inside the inverter do not work until the case
temperature reaches approximately 104 F or the load reach
40% of rating power.
1. INSTRUCTION
The GIANDEL Power inverter product line is used for back-up power. It converts DC
(direct current/car battery) power into AC (alternating current) power that can be used
for running a wide variety of tools and appliances under rating power. This inverter is
perfect for providing mobile power in cars, boats and work trucks. The inverter can
also be utilized as a back-up source of electricity in the event of an electrical failure or
for several off-grid applications such as camping or in your RV.
Please read this instruction manual carefully and make sure your inverter is installed
properly before using.
2. WARNING AND SAFETY
1) Read the manual before connecting this inverter and keep it for future reference.
2) Don't put the inverter under sunlight, near a heating source, wet or humid environment.
3) The case housing of inverter will be hot while using. Do not allow flammable materials
to contact the inverter, such as clothing, sleeping bags, carpet or any other flammable
materials. The heat from the inverter can damage these items.
4) The power inverter is designed to be used with a negative ground electrical system!
Don't use with positive ground electrical systems (the majority of modern automobiles,
RVs, trucks and boats are negative ground).
5) Do not disassemble the unit: it may cause fire or electric shock.
6) This device should only be serviced by a qualified technician. This item does not have
any serviceable parts.
7) Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and
refrigerator enclosures during installation.
8) Do not operate the inverter if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgement or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the inverter.
9) People with pacemakers should consult their physician(s) before using this product.
Electromagnetic fields in close proximity to a pacemaker could cause interference to or
failure of the pacemaker.
10) Keep the inverter well-ventilated. Do not place any objects on top of or next to the
inverter or allow anything to cover the cooling fans; doing so can cause the inverter to
overheat, causing a potential fire hazard and/or damage to the inverter. Leave
adequate ventilation space underneath the inverter as well; thick carpets or rugs can
obstruct air flow, causing the inverter to overheat.
11) Avoid unintentional starting. Be sure the switch is in the OFF position when not in use
and before plugging in any appliance.
12) Keep inverter away from children. Don't install the inverter where it is accessible to
children.
13) The power inverter will output the same AC power as utility power, please treat the AC
outlets as carefully as you would your home AC outlets. Do not put anything other
than an electrical appliance into the output terminal. It may cause shock or fire.
14) Disconnect the battery and inverter when not in use.
Note:
Performance of this unit may vary depending on the available battery power or
appliance wattage.
1.
MODEL
DATA
30A
20
30A
10
Power Inverter With
Remote Controller