BIOS Setting
34
3.3.5 SATA Configuration
SATA Controller
This item Enables or Disables the built-in SATA controllers on the motherboard. The default
setting is [Enabled].
SATA Mode Select
This item selects the SATA mode for a device installed on a SATA drive. The default setting is
[AHCI].
Port 0 / 1 / 2
This feature is uesed to enable or disable the SATA port. The default settiong is [Enabled];
Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRESET
initialization sequence to the device. The options are Enabled and Disabled.
SATA Device Type
This feature configures the selected SATA port to support either a solid state drive or hard
disk drive. The options are Hard Disk Drive and Solid Sate Drive.
Содержание N30M-VA
Страница 1: ...All right reserved...
Страница 34: ...BIOS Setting 33...
Страница 60: ...BIOS Setting 59 3 8 2 View SMBIOS Event Log This section displays the contents of the SMBIOS Event Log...