Hardware Installation
15
D
IM
M
1
D
IM
M
2
D
IM
M
3
D
IM
M
4
Due to CPU limitations, read the following guidelines before installing the memory in Dual
Channel mode.
A. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.
B. When enabling Dual Channel mode with two or four memory modules, it is recommended
that memory of the same capacity, brand, speed, and chips be used for optimum
performance.
C. If you install only one DIMM, please install in DIMM4;
If you install two DIMMs, please install in DIMM4&3 or DIMM4&2;
If you want to install three DIMMs, please install in DIMM4&3&2;
If you want to install four DIMMs, please install in DIMM4&3&2&1.
2.4.2 Installing a Memory
Installation Step:
Step 1. Insert the DIMM memory module vertically
into the DIMM slot, and push it down.
Step 2. Close the plastic clip at both edges of the
DIMM slots to lock the DIMM module.
Caution:
A. NOTE! DIMM must be populated in order starting
from DIMM4 socket.
B. For dual-channel operation, DIMMs must be
installed in matched pairs.
Reverse the installation steps when you wish to
remove the DIMM module.
2
2
1
Содержание N30M-VA
Страница 1: ...All right reserved...
Страница 34: ...BIOS Setting 33...
Страница 60: ...BIOS Setting 59 3 8 2 View SMBIOS Event Log This section displays the contents of the SMBIOS Event Log...