Giada N21M-MV, Руководство пользователя

Страница: 19 / 46

18

The memory module vertically into the slot to avoid
damaging the socket.
Remove the memory
Remove the memory module, follow these steps:
1. To pressure the white retaining tabs from Both ends of the memory slots to release the memory;
2. Then remove the memory module from the slot.

While removing the memory, you can use your fingers to
hold on memory, to avoid damage to the memory.
2.5.2:Memory Description
The N21N-MV motherboard(CPU is C2550,each channel with 2 DIMMS)
，
support DDR3
（
1.5V
）
and
DDR3L
（
1.35V
）
memory(up to 64GB,2 memory controllers,2 ranks each,8 banks per rank,8-Gbit density
components,1600MHz /1333MHz
） ，
support 64bit data bus& 8 bit ECC
，
Also supports non-ECC
memory
，
But take a note,it only support the DRAM chips (X8 density is 1Gb
、
2Gb
、
4Gb
、
8Gb).
It should be noted,If only one channel, you must use channel A :
1:This motherboard only supports the use of 1,2,4 memory: If using a single memory, you must use
DIMM1 memory channel A, if you use two memory modules, you can only use two with the program,
A_DIMM1, A_DIMM2 or A_DIMM1, B_DIMM1;
2:The Rank number of each memory channel can support is 1,2,4,if you use a 2Rank memory ,This
memory is used for memory chips to be consistent;
3:If both channels A and B must be used, The two channels used memory to be consistent.
Specifications as follows:
2.1 Supported DDR3 Device