Smart APP User Guide
5.4
Complete the following steps to register for iOS system:
●
Smart Module configuration:
Connect the mobile phone with wireless router, turn on
the power of the air conditioner, press "
T
TIMER
L
C
" button of
the remote controller to start the Wi-Fi configuration.
T
TIMER
L
C
Distance ≤ 8m
●
Press
"add Air Conditioner"
in the APP, chose
"No/ Don’t know"
if it is the first start.
●
Please follow the instruction in Chapter 6, point 1 To
addair conditioner, if it has been connected to Wi-Fi
hotspot.
Enter Home
Enter Home
Enter Home
Yes
Does your air-conditioning has been
connected to the netword yet?
No/Don’t know
21:09
Yes
No/Don’t know
Next
please long press the AC remote
control about 2 seconds toward
AC,When hear a long and a short
beep,The AC enters configuration
state.
21:09
Next
●
Follow the interface instruction, long press the "
T
TIMER
L
C
"
button of the remote controller for 2 seconds, Then
after long beep and short beep, hotspot SkySAC_XXXX
will appear for configuration from air conditioner.
The last 4 digits of hotspot name from 0-9 number and
A-F English letters composition ,the air conditioner will
enter configuration status.
The air conditioner will enter configuration mode if the
following three phenomena appear at the same time:
14
