GHM DeltaOHM BAROsense, Руководство по эксплуатации

Страница: 12 / 24

BAROsense
- 12 -
V1.2
Units of measurement:
Command Reply Description
CUn &| Sets the pressure unit of measurement of index n:
 Torr if n=0

Pa if n=1

hPa if n=2

kPa if n=3

mbar if n=4

psi if n=5

kg/cm
2
if n=6

mmH
2
O if n=7

mmHg if n=8

inH
2
O if n=9

inHg if n=10

atm if n=11

bar if n=12
Default : 2

hPa
RU & n| Reads the pressure unit of measurement.
TTn &| Sets the temperature unit of measurement of index n:

°C if n=0

°F if n=1
Default : 0

°C
HT & n| Reads the temperature unit of measurement.
Pressure measurement offset:
Command Reply Description
COn &| Adds the offset n to the measured pressure value.
For the value n to be entered, see Note 1 below.
The offset must be within the ±10 hPa range or equiva-
lent range in the set unit of measurement, if different
from hPa.
Default : 0
RO & n| Reads the pressure measurement offset (see Note 1
below).
Restoring the factory configuration:
Command Reply Description
DFLT &| Restores the factory configuration.