GHM Delta OHM HD3405.2, Руководство пользователя

Страница: 31 / 44

- - 31
CONNECTION TO A PC
The connection to the RS232C del PC serial port of the PC uses the cable with code
HD2110CSNM: sub D 9-pole female connector on one end – 8-pole MiniDin on the other end. The
connection to the USB port uses the cable with code HD2101/USB: USB type A connector on one
end – 8-pole MiniDin on the other end.
The instrument is supplied with the DeltaLog9 software (version from 2.0) that manages the con-
nection, data transfer, graphic presentation, and printing operations of the captured or logged meas-
urements.
The DeltaLog9 software is complete with "On-line Help" (also in PDF format) describing its
characteristics and functions.
The HD3405.2 instrument
is compatible with the HyperTerminal communication program supplied
with the Windows operating systems (from Windows 98 to Windows XP).
C
ONNECTION TO THE
RS232C
SERIAL PORT
1. The measurement instrument must be switched off.
2. Using the Delta Ohm HD2110CSNM cable, connect the measurement instrument to the first free
serial port (COM) of the PC.
3. Turn on the instrument and set the baud rate to 38400 (MENU >> ENTER until the Baud Rate
parameter >> select 38400 using the arrows >> confirm with ENTER). The parameter remains in
the memory until replacement of the batteries.
4. Launch the DeltaLog9 application and press CONNECT. Wait for the connection to occur and
follow the indications on the screen. For a description of the DeltaLog9 application, please refer
to its on-line Help.
C
ONNECTION TO THE
RS232C
SERIAL PORT
The USB connection requires the installation of the drivers . They are contained in the Delta-
Log9 CD-Rom (Version 2.0 or later versions)
Proceed as follows:
1. Do not connect the instrument to the USB port until you are expressly requested to do it.
2. Insert the DeltaLog9 CD-Rom, and select the “Install/Remove USB driver" item”.
3. The application checks the presence of the drivers on the PC: the installation starts if they are
not present; if they are already installed, the drivers are removed by pressing the key.
4. The installation wizard prompts the software user license: to proceed, the software usage
terms must be accepted - click on YES.
5. On the next page the folder where the drivers will be installed is indicated: confirm without
modifying.
6. Complete the installation by clicking on Finish. Wait few seconds until the DeltaLog9 page
appears.
7. Close DeltaLog.