HD2328
- 7 -
V1.7
The DATA key is used for the following functions:
•
DATA: during normal measurement, by pressing this key once the maximum
(MAX) value of the measurements captured by the probes connected to the
instrument is displayed, updating it with the acquisition of new samples;
-
by pressing this key again the minimum (MIN) value is displayed;
-
by pressing this key a third time the average (AVG) value is displayed.
The acquisition frequency is once a second.
The MAX, MIN and AVG values remain in the memory until the instrument is on,
even after exiting the DATA display function. When the instrument is off, the
previously memorized data are cleared. Upon turning on, the instrument
automatically starts memorizing the MAX, MIN and AVG values.
To reset the previous values and start with a new measurement session, press
CLR until the FUNC_CLRD message appears.
•
ENTER: once the MENU has been opened with the DATA+UNIT keys, the DATA
key will perform the ENTER function and the MENU can be browsed and the
displayed parameter confirmed.
The CLR key has two functions:
•
CLEAR (CLR): allows to reset the maximum (MAX), minimum (MIN) and average
(AVG) value of the captured measurements;
•
ESC: once the MENU has been opened with the DATA+UNIT keys, the CLR key
will allow to cancel the parameters set using the
and
arrows.
The HOLD key is used for the following functions:
•
HOLD: by pressing this key the current measurement update is stopped and the
"HOLD" message will appear in the upper left-hand corner of the display. To return
to the current measurement, press the key again.
•
: once the MENU has been opened with the DATA+UNIT keys, the
key will
allow to increase the value of the selected parameter.
Pressed together with the ON/OFF key, during turn on, the AutoPowerOff function is
disabled (see the description of the ON/OFF key).
DATA/ENTER key
HOLD/
key
CLR/ESC key
Содержание Delta OHM HD2328.0
Страница 4: ...HD2328 4 V1 7 Thermocouple Thermometer HD2328 0 ...
Страница 19: ......