G 1107 / G 1113
Measurement Basics | 5
B-H88.0.2X.DK2-1.1
17 / 25
5.1.4
A
V
R
0
:
02
/
A
V
R
0
:
05
/
A
V
R
0
:
10
Fast measurement with mean value over 2 s / 5 s / 10 s
Mean value mode for measurement of heavily fluctuating pressures.
In the
Configuration mode
, a special function
A
V
R
0
:
02
,
A
V
R
0
:
05
or
A
V
R
0
:
10
has been
selected.
By pressing and holding the
Function key
for 4 s. the measurement with mean value
can be activated.
_
Heavily fluctuating values arise particularly with dynamic pressure/compression meas-
urements in chimney draft tests of forced-air burners and, consequently, conventional
electronic manometers are not adequate for task. This special function optimises the
device for this application purpose.
The different mean value times of 2, 5 or 10 seconds can be selected depending on
the requirement.
_
The first parameter is shown in the auxiliary display.
_
By pressing and holding the
Function key
for 2 s., the special function can be activated.
END FVNC
appears in the display.
_
If the Tare function is activated when called up, this special function
A
V
R
can be reset
by pressing and holding the
Function key
for 4 s. In order to reactivate the Tare, the
special function must be switched in the configuration menu.
