G 1107 / G 1113
Measurement Basics | 5
B-H88.0.2X.DK2-1.1
15 / 25
5.1.1
NVLL
Tare function
The special function
FVNC
NVLL
has been selected in the configuration menu.
The display can be zeroed by pressing the
Function key
for 4 s. If the tare function is
activated,
NVLL
blinks in the lower display. The tare function can be reset by pressing
the
Function key
again for 4 s.
NOTE
The tare function is independent of the zero point correction accessible via the settings
menu.
5.1.2
F,NE
High-resolution measurement with 0.1 Pa (G 1107)
High-resolution measurement for the finest adjustment work, 4 Pascal Test (test of
chimney draft with living-space-independent single combustion) and many other finely-
adjusted pressure applications.
In the
Configuration menu
, the special function
FVNC
F,NE
has been selected.
The high-resolution measurement can be activated by pressing and holding the
Func-
tion key
for 4 s. Then the sensor is immediately zeroed and the optimised parameters
for this measurement are activated.
CAUTION
When starting the special function, make sure that there is no pressure at the connec-
tions.
NOTE
The increased current consumption in this mode decreases battery life.
The quickly determined measurement replaces other devices, such as a U-tube ma-
nometer. The four bars in the lower display provide additional support.
–
The two middle bars appear: Measurement is stable
–
Left bars appear: the measurement decreases
–
Right bars appear: the measurement increases
