Ghibli AS40 KS Скачать руководство пользователя страница 3

   

ENGLISH   3   

   

   

   

1.

 

INTRODUCTION   

Before   using   the   appliance   carefully   read   this   manual.   This   manual   is   an   integral   part   of   the   machine   itself;   
for   this   reason   it   must   be   preserved   with   care   in   a   safe   place   that   is   accessible   to   all   the   users   (operators   
and   maintenance   personnel)   for   the   whole   machine   lifetime   untildemolition.   

   

2.

 

GENERAL   WARNINGS   

Plastic    bags,    polystyrene,    staples,    etc.…must    not    be    leftwithin    the    reach    of    children    as    they    are   
potential   sources   of   danger.   
   

Before   activating   the   appliance,   make   sure   thatthe   mains   voltage   corresponds   to   the   one   indicated   on   
the   data   plate.   

   

DO    NOT    pull    the    power    cord    to    remove    the    plug    from    the    power    socket.    Instead,    remove    the    plug   
holding   its   body   with   your   hand.   

   

Completely   unroll   the   electric   cord   during   the   appliance   use.   

   

It   is   allowed   to   use   extensions,   but   only   ifhomologated,   dimensioned   according   to   the   appliance   power   
and   in   a   good   state   of   conservation.   

   

Do   not   use   the   appliance   if   the   plug   or   the   electric   cord   are   not   in   good   conditions.   

   

If   the   power   cord   of   the   appliance   is   damaged,   it   must   be   replaced   exclusively   by   a   technical   assistance   
centre   authorized   by   the   manufacturer.   

   

   

Avoidletting   the   electric   cord   slide   on   sharpedges.   

   

Avoid   crushing   the   electric   cord.   

   

Do   not   use   the   appliance   with   wet   orhumid   hands.   

   

Do   not   leave   the   appliance   exposed   to   atmospheric   agents.   

   

Do   not   use   the   appliance   ifit   shows   functioning   anomalies.   Instead,   take   it   to   an   authorized   assistance   
centre.   

   

In   case   offailure,   please   exclusively   refer   to   an   authorized   assistance   centre   alwaysasking   for   original   
spare   parts.   

   

   

Before   performing   any   maintenance   or   cleaning   operation   it   is   mandatory   to   remove   the   plug   from   the   
power   socket.   

   

   

Do   not   wash   the   appliance   with   waterjets.   

   

Do   not   immerse   the   appliance   in   water   or   in   other   liquids.   

   

   

Содержание AS40 KS

















Отзывы: