Ghibli & Wirbel AD60 IK D HD, Использование и обслуживание

Страница: 10 / 16

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH - 2
Switching off the appliance
- Push the switches (13, 14 Fig. 9) to the
“0” position to stop the device; the lights,
if any on the switches, will go off.
- Remove the plug (12 Fig. 8) from the
electrical socket.
- Wind up the cable (15 Fig. 10) and hook
it onto its housing (16 Fig. 10).
CLEANING AND
MAINTENANCE
DANGER:
Before performing any maintenance op-
eration, unplug the appliance from the
electrical socket.
Emptying the recovery tank
- Release the lever (1 Fig. 1) and remove
the top (2 Fig. 2) along with the engine.
- Remove the filter bag (3 Fig. 3) and clean
it as described above.
Residues after the use of the vacuum
cleaner
- Empty the contents of the tank into a
trash bag.
Residues after the use of the liquid vac-
uum
- Place it on the top of a drain and empty
the liquid in the recovery tank (17 Fig.
11).
- Clean the inside of the tank with running
water and then re-install everything doing
the opposite of the disassembly.
For machines equipped with drain
hose
- Release the exhaust tube (18 Fig. 12)
from its base.
- Unscrew the button (19 Fig. 12), re-
move the cap (20 Fig. 12) of the ex-
haust hose (21 Fig. 12) and drain the
liquid in the recovery tank (22 Fig.
12).
Daily cleaning
Checking and cleaning the TNT
(polyester) filter
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with motor.
- Remove the polyester (3 Fig. 3) filter.
- Clean the filter (Fig. 13) from the inside
out with a blast of air; the filter can be
washed (Fig. 13) in warm water and must
only be replaced once it is completely
dry. If it is too dirty, replace it.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Cleaning the appliance
- Clean the unit body with a cloth damp-
ened with water or a mild detergent.
- Remove the top, as described above and
clean the inside with running water and
then empty it, as indicated above.
Replace everything doing the opposite of
the disassembly.
DANGER:
Do not wash the appliance using jets of
water.
NOTE:
Make sure the tank is completely dry before
using your device as a dust vacuum.
Periodic checks
Checking the floater
- Remove the top as shown above.
- Check If the floater (23 Fig. 14) is In
good condition and if it moves freely in its
space.
PROBLEM CAUSE SOLUTION
The vacuum cleaner does
not work.
Switch not pressed.
Plug not inserted.
No current.
Press the switch.
Insert the plug into the sock-
et.
Check the power supply line.
Suction is not satisfactory. Filter elements clogged.
Accessories or tubes
clogged.
Clean the filter elements.
Check and clean the flexible
hose and the suction nozzle.
Manuale HD LINE_8050828_1ed_04-2017.indd 2 18/04/17 15:53